DiSEqC 4 X 1 Switch: Free-To-Air Satellite

DiSEqC 4 X 1 Switch

The DiSEqC switch will enable the user to select one LNB signal between 4 different LNBs of any type. The 4 input ports marked SAT1, SAT2, SAT3 or SAT4 are connected to the 4 LNBs, which may be on 4 different dishes, and the output marked OUT is connected to the receiver. The selection of the LNBs is done by choosing the appropriate Tone Burst A, B, C, or D in the menu of the receiver.

Features:

DiSEqC 2.0 support bi-directional DiSEqC full control functions

Allow remote units to report their possible and actual configuration

4 satellite inputs selected by DiSEqC commands

Support DiSEqC “stand-by” commands

1 output for receiver with “DiSEqC” commands function

Backwards compatibility with “Tone Burst”

Impedance: 75 Ohm, all ports

Connectors: "F" type female

Frequency Range	Insertion Loss	Return Loss	DC Power Loss	Power Passing
950-2400MHz	<3 dB	<8 dB	<10 mA	500 mA