- ORIGINAL EchoStar® EQUIPMENT ~ NOT AN AFTERMARKET PRODUCT!
- Designed to be used with the DISH 500® Antenna. Use to capture signals from both Dish Network satellites (119º and 110º).
- The third port is used to collect and combine signals from a separate satellite dish antenna aimed at either the 61.5º OR 148º satellite (Round 18-inch dish equipped with a DISH-PRO LNBF is required).
-
Supports
connection of up to two satellite receivers in any combination:
- Single-cable connection to DISH Pro Plus (dual-tuner) receivers, when each is used with a DP Plus Separator. DP Plus Separators are sold separately.
- Single-cable connection to two single-tuner DISH Pro receivers.
- Single-cable connection to Legacy receivers, without a DISH Pro Adapter.
-
Includes an LNBF
input port for reception from a third orbital location.
- Allows connected receiver(s) to receive signal from three orbital locations (not available when two legacy receivers are connected).
- Eliminates need for an additional switch for this three orbital location installation.
- All necessary switches are built-in and weather-proof.
- DISH Pro Plus (dual-tuner) receivers supported include these models: 322, 522, 625, 721, 921, 942 and equivalent JVC and RCA models.
- Legacy receivers supported include these models: 2700, 2800, 3700, 3900, 4700, 4900 and 6000. *Important: Third input port is disabled if two Legacy receivers are connected. You must have one Dish Pro Receiver connected to realize full potential of this product.
IMPORTANT: Before ordering this product, we highly suggest you download the user guide and familiarize yourself with its contents to determine if your satellite receivers are supported and your intended application is feasible.
